The MTF20-4 straightening cutting and marking machine

PATENT PENDING.

The MTF20-4 machine is appositely studied for the cutting and marking of tig welding rods.

It processes aluminium, bronze, stainless steel and carbon steel with diameters:

• 1,2mm
• 1,6mm
• 2,0mm
• 2,4mm
• 3,2mm
• 4,0mm
• 5,0mm

Complete with accessories for the different kind of wires allows to mark both rods-end at fixed leght of 1000mm or 914mm.

The required cutting length is set by means of a touch-screen, connected to an encoder.

Max. production capacity: 86 pcs/minute for cut length 1000mm, ( depending on the material type and diameter)

The pressure of the feed rollers and encoder roller can be adjusted by means of pneumatic pressure devices.

The feed rollers are coated with plastic material and with hardened steel 63HRC.

The encoder roller is in hardened steel 63HRC .

Guides and blades are in hardened steel 63HRC.

Quick wire straightening opening and closing system by means of position indicators.

The modular configuration allows a quick change of the composition of the machine.

The MTF20-4 cutting and marking machine is equipped with a fix jig enabling to constantly check the straightening and the length of the cut wire.