Via Cabella Lattuada, 41
Annone Brianza (LC)
Cometo’s wire-straightening machine MTF22 with chamfering system is suitable for the straightening and the cutting of materials with diameter from 0,8 to 6,0 and for the chamfering of wires from 3,0 to 6,0 mm.
Thanks to its straightening system with rollers, it’s suitable to process different wires: round, square, hex and profiles with any possible shape. Furthermore it’s suitable for the straightening of materials such as steel and copper or aluminium alloys, without any risk of surface scratching.
The straightening and cutting machine MTF22 is assembled on a sturdy electro-welded frame, properly designed to allow an easy composing of the machine, in order to meet any needing, employing wire-straighteners of different sizes, three different feeder models and two cutting units to be chosen.
The chamfering unit SM12 performs a “V” incision on the straightened wire, then the unit cuts it in the incision spot. The chamfering unit is able to chamfer on one end only, on both ends and it can also be by-passed in case no chamfering is temporarily needed.
The cut length can be adjusted in a very simple way: it’s just necessary to set the parameter of the wished length by digiting it on the touch-screen. The feeding speed can be set from 5% upto 100% of the max. speed (with bars 1000 mm it is 92 pieces/minute).
The bars unloading system is available upto a max. length of 500 mm or in a special version with motorized cradle, built in modules 1000 mm long, suitable for bar lengths from 1000 to 6000 mm.
A further important value of this machine is its extreme noiselessness, which is a high value in consideration of the health of the operators working besides this kind of machines all day long.
Cometo is keen to announce that on August, 17th 2015 its ISO9001:2008 certificate has been issued by the International Organization for Standardization.
The certification is intended to grant our customer the maximum quality and professionalism. Its’ aim is to improve efficiency of the production process, reduce the down times, continuosly update the management system and support the human resources by giving a continous support and knowledges to finally reach the highest business quality.
Cometo SRL widens his production range adding new pay-off SVO500 & SVO2000
TO HAVE MORE INFO ABOUT THESE NEW PRODUCTS PLEASE VISIT OUR WEB-SITE PAGE UNDER PRODUCTS CATEGORY MACHINES
Cometo SRL will display its new machine MTF together with the multiple equipment part of its production range during the show that will take place at the Georgia World Congress of Atlanta, GA, U.S.A. from April 28th-30th 2015.
Mr Pietro Tocchetti together with Mr Allan Brown would be pleased to welcome you at the booth # 1932.
Starting from July, the 21st 2014 Cometo has splitted into two, with registration at the pertinent Authorities.
The formal enrollment document has been recorded at the Registro delle Imprese in Lecco. The newly established company COMETO SRL will replace the old Cometo di Tocchetti Pietro & C. s.n.c. for all new and past business, therefor we kindly ask you to take note of the new company data:
Via Cabella Lattuada, 41
I-23841 ANNONE DI BRIANZA (LC)
VAT NR. 03534410133
Enrollment c/o Registro delle Imprese in Lecco RI/PRA/2014/15901
Станок спроектирован для резки и маркировки прутков для сварки методом TIG алюминия, бронзы, нержавеющей стали, углеродистой стали и подходит для следующих диаметров:
Станок MTF20 поставляется в комплекте с аксессуарами для перечисленных видов проволоки и позволяет осуществлять маркировку с обоих концов на фиксированной длине 1000мм и 914мм.
Длина изделия контролируется с помощью внешнего кодирующего устройства и программируется с сенсорного экрана.
Максимальный объем производства составляет 90 штук в минуту на длине 1000мм (максимальное производство зависит от типа материала и диаметра).
Далее представлены основные характеристики станка:
The staff thanks customers and visitors for the interest shown in Cometo products during the Wire&Tube exhibition 2014
Cometo will take part to the most important event for the wire and tube industry in Duesseldorf from 07.04.2014 till 14.04.2014 !
Visit us and touch with hand the latest innovations! BOOTH 10D38
The great experience of Cometo, built during the several years of manufacturing of innovative systems for the processing of wires and cables, shows itself on the web with a completely new site version.
In its new site, which is the result of a strong restyling of the previous version, Cometo presents its whole wide range of products and applications for the strenghtening, the enervation, the unwinding and the guiding of wires.
The brand new website also shows how Cometo’s wire straighteners can even offer different machining possibilities, according to customer’s requirements.
The new Cometo website is a complete instrument, able to communicate either with the traditional computer systems and also with the latest mobile technology: its graphic is basical and simple, easy to manage for each kind of user cathegory, even for the most modern smartphones and tablets.
Cometo’s products are well known and appreciated all over the world; for this specific reason the Company owed by Pietro Tocchetti has completed its new website with contents in English, German, Spanish and Russian, accomplishing its natural vocation for internationality and offering attention to all markets which appreciate the importance of product quality.