Инновационные системы для сектора переработки проволоки, канатов и труб

Мировой лидер по внедрению решений для производства металлической проволоки

RU - News NEW PFR43 rotating die holder Cometo - Cometo

Logistics and Industry 4.0: Cometo installs four new automatic warehouses

During the month of May 2019, Cometo SRL has successfully completed the construction works of <strong>4 new vertical automatic warehouses</strong>, equipped with 320 drawers and a total capacity of 240,000 kg.

Thanks to the rapidity of the new installations, the company will now be able to process the orders much faster.

 

 

Furthermore, the new logistics system is perfectly in line with the concept of industry 4.0 and therefore constantly connected with the company ERP to receive picking lists from the office, stocks update, execute warehouse loads, etc.

 


 

 

NEW PFR43 rotating die holder Cometo

NEW PFR43 rotating die holder Cometo

Cometo’s PFR43 rotating die holder has been engineered to be used on dry drawing matchings.

The rotary movement insures improved wire lubrication through the die and helps to preserve the wire’s roundness without deforming it.

The PFR43 is available with or without the case engineered to contain the stearate.

Cometo can also supply a case for liquid lubricant.

Rotating die holder advantages:

—          quick change die holder: just loosen the locking cap a few rotations and extract the die in the cooling tank,

—          quick coolant check,

—          die coolant bathes the die in an open tank, without creating any pressure guaranteeing improved duration of the seals.

PFR43-061-WEB

WIRE-STRAIGHTENING MACHINE FOR CUT TEST-SAMPLES MRS180

The wire-straightening machine model MRS180 is designed for the straightening of hot-rolled wire bars, cut for random checking during the winding process, in order to get samples to be used for laboratory tension tests.

This machine consists of 4 motorized rollers pushing the wire into a wire-straightener equipped with idle rollers, and of 4 further rollers pulling out the wire from the wire-straightener.

This machine is suitable for the straightening of wires with diameter range from 5.5 mm to 26.0 mm.

The operation of machine setting from one wire diameter to another one requires less than 6 minutes

MTF22 straightening and cutting machine with chamfering system SM12

During the fair in Düsseldorf from 16 to 20 April 2018, at hall 9/ C 54, Cometo will present a new version of the MTF22 straightening and cutting machine with chamfering system SM12, already on the market since 2016 as a pneumatic version.

As a result of the adjustments made to the machine, the new electronically controlled version has a greater precision, it is also faster and silent.

Unlike the previous version, the machine that will be introduced  also allows to change the chamfer size during processing.

fiera logo

RU — WIRE STRAIGHTENING AND CUTTING MACHINE MTF22 WITH CHAMFERING SYSTEM SM12

bacchetteMTF22+SM12pietroCometo’s wire-straightening machine MTF22 with chamfering system is suitable for the straightening and the cutting of materials with diameter from 0,8 to 6,0 and for the chamfering of wires from 3,0 to 6,0 mm.

Thanks to its straightening system with rollers, it’s suitable to process different wires: round, square, hex and profiles with any possible shape. Furthermore it’s suitable for the straightening of materials such as steel and copper or aluminium alloys, without any risk of surface scratching.

The straightening and cutting machine MTF22 is assembled on a sturdy electro-welded frame, properly designed to allow an easy composing of the machine, in order to meet any needing, employing wire-straighteners of different sizes, three different feeder models and two cutting units to be chosen.

The chamfering unit SM12 performs a “V” incision on the straightened wire, then the unit cuts it in the incision spot. The chamfering unit is able to chamfer on one end only, on both ends and it can also be by-passed in case no chamfering is temporarily needed.

The cut length can be adjusted in a very simple way: it’s just necessary to set the parameter of the wished length by digiting it on the touch-screen. The feeding speed can be set from 5% upto 100% of the max. speed (with bars 1000 mm it is 92 pieces/minute).

The bars unloading system is available upto a max. length of 500 mm or in a special version with motorized cradle, built in modules 1000 mm long, suitable for bar lengths from 1000 to 6000 mm.

A further important value of this machine is its extreme noiselessness, which is a high value in consideration of the health of the operators working besides this kind of machines all day long.

 

 

 

ISO9001:2008 CERTIFICATION

Cometo is keen to announce that on August, 17th 2015 its ISO9001:2008 certificate has been issued by the International Organization for Standardization.

The certification is intended to grant our customer the maximum quality and professionalism. Its’ aim is to improve efficiency of the production process, reduce the down times, continuosly update the management system and support the human resources by giving a continous support and  knowledges to finally reach the highest  business quality.

 

 

RU — ISO9001:2008 CERTIFICATION

Cometo is keen to announce that on August, 17th 2015 its ISO9001:2008 certificate has been issued by the International Organization for Standardization.

The certification is intended to grant our customer the maximum quality and professionalism. Its’ aim is to improve efficiency of the production process, reduce the down times, continuosly update the management system and support the human resources by giving a continous support and  knowledges to finally reach the highest  business quality.

 

 

RU — NEW COMETO WIRE PAY-OFF SVO500 & SVO2000

Cometo SRL widens his production range adding new pay-off SVO500 & SVO2000

TO HAVE MORE INFO ABOUT THESE NEW PRODUCTS PLEASE VISIT  OUR WEB-SITE PAGE UNDER PRODUCTS CATEGORY MACHINES

RU — COMETO SRL EXHIBITING AT INTERWIRE, 28-30 April 2015

Cometo SRL will display its new machine MTF together with the multiple equipment part of its production range during the show that will take place at the Georgia World Congress of Atlanta, GA, U.S.A. from April 28th-30th 2015.

Mr Pietro Tocchetti together with Mr Allan Brown would be pleased to welcome you at the booth # 1932.

RU — COMETO SRL

 

Starting from July, the 21st 2014 Cometo has splitted into two, with registration at the pertinent Authorities.

The formal enrollment document has been recorded at the Registro delle Imprese in Lecco. The newly established company COMETO SRL will replace the old Cometo di Tocchetti Pietro & C. s.n.c. for all new and past business, therefor we kindly ask you to take note of the new company data:

COMETO SRL

Via Cabella Lattuada, 41

I-23841 ANNONE DI BRIANZA (LC)

VAT NR. 03534410133

TEL: 0341-263090

FAX: 0341-260927

Enrollment c/o Registro delle Imprese in Lecco RI/PRA/2014/15901

REA 319508